SOLAR CABLE

Adapted to PV systems, EN 50618:2015.

Max. Permissible Ambient Temperature : +90°C (stationary and in motion )

Max. Permissible Operating Temperature of The Conductor :

+120°C, Interpretation according to IEC 60216 : permanent temperature

120°C for 20,000 h ( = 2.3 years ), at max. 90°C permanent temperature ( = 30 years )

Short - Circuit Temperature : +200°C (at the conductor max. 5 sec. )

Damp - Heat Test : According to EN 60068 - 2 - 78. 1,000h at 90°C and 85% humidity

Min. Permissible Ambient Temperature : -40°C (stationary and in motion)

Resistance to Cold :Bending test at low temperature according to DIN EN 60811 - 1 - 4, Impact test similar to DIN EN 50305

Minimum Bending Radius : Fixed Installation approx. 4 x cable Ø

Voltage Rating : AC 0.6 / 1.0 kV

Max. PV - System Voltage : DC up to 2.0 kV possible

Max. Permissible Operating Voltage in AC Systems : 0.7 / 1.2 kV

Max. Permissible Operating Voltage in DC Systems : 0.9 / 1.8 kV

Test Voltage : AC 6 kV / DC 10 kV (15 min.)

Tensile Load : 15 N / mm² in operation. 50 N/mm² during installation

Shrinkage Test : According to EN 60811 - 1 - 3

Shore-Hardness : 85 shore A according to DIN EN 53505

Pressure Test at High Temperature : According to EN 60811 - 3 - 1

Dynamic Penetration Test : According to requirements for cables for PV systems, DKE / VDE 411.2.3

Mineral Oil Resistance : 24h, 100°C according to DIN VDE 0473 - 811 - 2 - 1, DIN EN 60811-2-1

Acid and Alkaline Resistance : According to EN 60811-2-1 7 days, 23°C (N-Oxalic Acid, N-Sodium Hydroxide)

Ammonia Resistance : 30 days in saturated ammonia atmosphere (internal testing)

Weather Resistance : Ozone resistance according to DIN EN 50396 test Type B, HD 22.2 test Type B UV - resistance according to UL 1581 (Xenon - Test), ISO 4892 - 2 (Method A) and HD 506/A1-2.4.20

Absorption of water (gravimetric) according to DIN VDE 0473-811-1-3, DIN EN 60811 - 1 - 3

Behavior in Case of Fire :

Flame propagation

Single cable according to DIN VDE 0482 Part 332 - 1 - 2, DIN EN 60332 - 1 - 2

Multiple cable according to DIN VDE 0482 Part 266 - 2 - 5, DIN EN 50305 - 9

Low smoke emission according to DIN VDE 0482 Part 268 - 2

DIN EN 50268-2 (light transmittance > 70% )

Corrosivity according to DIN EN 50267 - 2 - 2

Toxicity according to DIN EN 50305, ITC - index < 3

Conductor : Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5

Insulation : UV resistant, cross linkable, halogen free, flame retardant compound for core insulation

Core Identification : Red, black or natural

Sheath : UV resistant, cross linkable, halogen free, flame retardant compound for Sheath over insulation

Cable Colour : Red, Black, Black with Red Strip